ছিলকা, কাঠের ছিলকা, কাঠের ছড়ি, ছিলকে, চটা, বাতা
(1) A narrow thin strip of wood used as backing for plaster or to make latticework
(1) The lath-and-plaster technique involves constructing a frame with rebar and attaching diamond metal lath (the same lath used for plastering walls) with tie wire to the frame.
(2) It's finished in the sense that there are paneled walls and not just exposed beams and studs and lath .
(3) First, a scratch coat is troweled onto the lath; the plaster oozes through the lath and grips the backing when it hardens.
(4) A lath and plaster wall
(5) A u251cu00f6u251cu00e7u251cu2510scratch coatu251cu00f6u251cu00e7u251cu00fb of Portland cement and sand is then plastered onto the lath and allowed to dry.
(6) If you are nailing over a lath and plaster ceiling, longer nails may be needed.
(7) They tested four-person suites with an assortment of options, such as restored or new flooring, restored or replaced windows, and restored plaster and lath walls or new veneered plaster walls.
(8) The wall insulation is subsequently covered with lath and plaster.
(9) In these areas, the layers of plaster are pulling away from the underlying strips of wood lath which support it.
(10) Cut lath and plaster with a reciprocating saw fitted with a coarse, wood-cutting blade.
(11) Fasten the corners of the gypsum lath or wallboard to the existing lath behind the plaster.
(12) The roof of a one-time fine farmstead is falling in, a gable end collapsed, lath and plaster rotting - romantic?
(13) Other materials sold by the bundle include things like wooden stakes, lath and wooden shims.
(14) Our choice would be to remove just the plaster and screw three-eighth-inch drywall directly onto the lath .
(15) Porous woven ceilings under the tile roofs are made of local wood laths woven in the traditional way as they often are in fences and partitions.
(16) Materials are carefully chosen to create a calm and welcoming atmosphere for instance, oiled oak floor and balustrades, white stained pine laths in ceilings.
(17) The shell consists of two double layers of 40 x 20 mm softwood laths at 400 mm centres pin-jointed together with more than 1000 bolts.
(18) Most ceilings are held in position by the adherence of the plaster to wooden laths , which are nailed to joists above.
(19) A grid of supple oak laths was laid flat, then gradually lowered over 15 weeks to its undulating form.
(20) The laths occur in bundles or packets with low angle boundaries between the laths .